vacuum tube solar manifold collector

vacuum tube solar manifold collector 1.for 5 years warrany. 2.SRCC,CE,SOLAR KEYMARK approved. 9.OEM for manifold collectors

vacuum tube solar manifold collector

1.for 5 years warrany. 2.SRCC,CE,SOLAR KEYMARK approved. 9.OEM for solar collectors

Working principle:

1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically.2) The circulation pump makes heat-conducting liquid circulate automatically.3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.5) In case the temperature of the tank does not reach Tm ax, then start the auxiliary heating device.

Feature:Collector separates with storage tank. The tank can be put in any place of house. And the collector can be put on the inclined roof or flat place.Module design, arbitrary combination, harmony with the building perfectly;Intelligent control and automatic operation;Anti-freeze: No water inside the tubes when it works.The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.Multifunction: Bathing, washing, domestic heating etc;Work at anytime and enjoyable. 

Structure:Model No: 100L 150L 200L 250L 280L  300L  360L 400L  500L.

Vacuum tube size:Φ 58mm*1800mm(Length),with copper heat pipe.

Bracket material:Aluminum alloy thichness:2mm ;width:40mm

The glistening obliquity:45 degree

Hail resistance:25mm.

Wind stress:180km/h

Freeze protection:-25 degree.

Heat preservation:72Hours.

Welcome to contact with me . Looking forward your inquiry.

vacuum tube solar manifold collector